Car equipment

Understand the intended use and check compatibility before buying.

Product selection guide

Gunson Eezibleed G4062: brake and clutch bleeding kit

A kit for bleeding hydraulic brakes and clutches on your own, using the pressure of the spare wheel.

Before choosing

Compare the intended use, model reference and included accessories. Published specifications do not replace the product manual.

Gunson Eezibleed: how pressure bleeding works

Gunson presents the Eezibleed as a compressed-air system for bleeding brakes and clutches, using the pressure of the spare wheel. The kit is designed for one-person use, with no need to pump the pedal. The manufacturer highlights a one-way flow mechanism and a sealed reservoir cap for contamination-free bleeding.

Kit contents and supplied caps

The kit includes a pressurised bottle for the new fluid, a bottle cap assembly, a set of bleed tubes, five cap and seal assemblies, a brass fitting, two fibre washers, a locknut and a hook. The caps cover diameters of 25 mm (Lockheed systems), 27 mm (some VAG systems), 44/45 mm (Girling metal reservoirs and ATE systems) and 46 mm (some Girling systems).

Before choosing this bleeder

Gunson specifies use on tandem master cylinders without sensors, tandem reservoirs, slave cylinders and vacuum servo cylinders. Check the cap diameter of your reservoir against those supplied: the manufacturer offers additional caps (part numbers G4058 and 77042) for other opening shapes.

Limitations to know

Gunson limits use to master cylinders without sensors: on any other system, follow the vehicle manufacturer’s procedure. Documentary sheet based on Gunson data, without workshop testing.

Read the related guide

Official manufacturer documentation

In the same category