A brake bleeder is a service tool for hydraulic braking systems. It helps remove air or replace brake fluid.
The tool is connected for servicing and removed when the work is complete.
What is a brake bleeder?
Bleeding removes air bubbles from the hydraulic brake circuit. The method depends on the vehicle and tool.
A compatible tool can also be used to renew the brake fluid. Use the specification required for the vehicle.
After servicing, the brakes must be checked in accordance with the vehicle manufacturer’s procedure.
How does a brake bleeder work?
A pressure bleeder connects to the reservoir through a suitable adaptor.
A hose attached to the bleed screw carries discharged fluid into a collection container.
A vacuum bleeder draws fluid out through the bleed screw.
The bleeding sequence, checks and permitted working pressure depend on the vehicle and the tool.
What does the tool help with?
A compatible tool helps remove air and old fluid in a controlled way.
The container collects the brake fluid that leaves the system.
With a pressure bleeder, a compatible, leak-tight adaptor makes it easier to connect to the reservoir.
After bleeding, check the brakes as specified by the vehicle manufacturer before returning to the road.
For regular use, check whether hoses, seals and adaptors can be replaced.
How to choose a compatible brake bleeder
Check that the tool suits your vehicle and is compatible with the specified fluid for the brakes you are servicing.
Compare the available connections and check the service procedure for your vehicle.
Check the adaptor, permitted working pressure and whether the seals are compatible with the fluid.
Choose a tool that meets your vehicle’s requirements. If you lack the equipment or experience, use a qualified workshop.


