Blog Mécanique

Guides, advice and equipment for looking after your vehicle.

CAR MECHANICS GUIDE

What is wheel alignment?

Qu’est-ce qu’un parallélisme ?
Article contents

You may have heard of wheel alignment. It involves measuring wheel angles and adjusting them to the vehicle manufacturer’s specifications if needed. Toe is one of those angles. It affects steering and tyre wear.

How is wheel toe measured? 

The toe angle describes how far the wheels on an axle point inwards or outwards when viewed from above. Camber is the tilt of a wheel when viewed from the front and is measured separately. 

Depending on the manufacturer’s specification, toe is expressed in degrees or in millimetres and is checked separately at the front and rear axles. 

A workshop measures wheel angles against the manufacturer’s specifications. String can give a rough indication. A precise adjustment needs suitable alignment equipment. 

How does wheel alignment affect driving?

With toe set correctly, the driver can expect more consistent steering. Grip still depends on the tyres, the road surface and the speed.

Alignment set to the manufacturer’s specifications can help the car track more consistently. Hitting a pothole or kerb hard can alter the alignment or damage a tyre or suspension component. 

Toe settings on a car

Zero toe means the wheels on an axle are parallel when viewed from above. Toe-in means the front edges are closer together than the rear edges. The correct setting can differ from zero and depends on the vehicle and axle.

With toe-out, the front edges are further apart. Too much toe-in or toe-out can cause uneven tread wear. The wear pattern alone does not identify the cause.

Incorrect toe can accelerate tyre wear and increase rolling resistance. Have the car checked if the tyres wear unevenly, the steering wheel sits off-centre or the car pulls to one side. 

Signs of poor wheel alignment on a car

One possible sign of poor alignment is a change in steering feel. The car may pull to the left or right on a straight road. Uneven tyre pressures or a damaged tyre can also cause pulling. 

After a hard impact to a wheel, have the tyre, rim and suspension checked. A workshop can then measure the wheel angles and compare them with the manufacturer’s specifications. 

If you book an alignment, ask for the measurement report so you can compare the readings with the specified values. 

Further reading